Prodigy Autocode Manual do Proprietário descarregar pdf (Página 14)

PRODIGY

AutoCode® Blood Glucose Meter PRODIGY

AutoCode® Blood Glucose Meter

Owner’s Manual Owner’s Manual

26

STEP 8: Set the Hour

Press and release the “M”

button to advance the hour.

With the correct hour on the

display, press the “SET” button

and the minutes segment will

start ashing. See Figure 13.

STEP 9: Set the Minutes

Press and release the “M”

button to advance the minutes.

With the correct minutes on the

display, press the “SET” button

and the current unit of

measurement will start ashing.

Important: Day averages are calculated from

results obtained during the 7, 14 and 28 days

preceding the current date and time settings.

Figure 12

Figure 13

27

STEP 10: Select Unit of

Measurement See Figure 14.

Press and hold the “M” button

for (4) seconds until the unit of

measurement you are choosing

appears on the display. Press

the “SET” button and the

memory segment will start

ashing. See Figure 15.

To skip this step, press the “SET”

button.

Your meter can display test

results in milligrams per

deciliter (mg/dL) or millimoles

per liter (mmoL/L).

• The mg/dL unit is standard

in the United States.

• The mmol/L unit is standard in Canada.

STEP 11: Delete Memory

When the “dEL” symbol and the ashing “ ”

symbol appear on the display, you can choose to

clear the memory. If you do not want to clear the

memory, press the “SET” button again to skip

this step.

Figure 14

Figure 15

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Comentários a estes Manuais

Sem comentários