Prodigy Autocode Manual do Proprietário descarregar pdf (Página 19)

PRODIGY

AutoCode® Blood Glucose Meter PRODIGY

AutoCode® Blood Glucose Meter

Owner’s Manual Owner’s Manual

Caution: Do not use test strips or control

solution that have exceeded the discard date,

are expired or have been damaged.

Your results may be inaccurate.

Contact Customer Care

If your test strips have been damaged or if you

continue to get out-of-range results, it means

that the system or the control solution may not

be working properly. DO NOT use the system to

test your blood glucose level. If you are unable to

resolve the problem, contact Customer Care at

1.800.243.2636.

Performing a Blood Glucose Test

Preparing the Lancing Device

STEP 1: Remove the cap of the

lancing device by twisting it off.

See Figure 22.

STEP 2: Insert a sterile lancet into the

lancet holder of the lancing

device and push down rmly until

the lancet is fully seated. Do not

twist the lancet. See Figure 23.

STEP 3: Remove the protective cap

from the lancet by twisting it and

then save it for later use.

See Figure 24.

STEP 4: Replace the cap onto the

lancing device. Screw the cap

until it is snug but not too tight.

STEP 5: Set the lancing level.

The adjustable tip offers ve (5)

levels of skin penetration. To

select the desired depth, twist the

Figure 22

Figure 23

Figure 24

Figure 25

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Sem comentários

Prodigy Autocode Manual do Proprietário Página 19