
PRODIGY
Owner’s Manual PRODIGY
Owner’s Manual
Prodigy Diabetes Care, LLC www.prodigymeter.com
30
31
Prodigy Diabetes Care, LLC 1.800.243.2636
STEP 10: Select Unit of Measurement
Press and release the “M” button until the unit
of measurement you are choosing appears on
the display. Press the “SET” button and the
memorysegmentwillstartashing.See Figures
26 and 27.
Your meter can display test results in milligrams per
deciliter (mg/dL) or millimoles per liter (mmoL/L).
• The mg/dL unit is standard in the United
States.
• The mmol/L unit is standard in Canada.
STEP 11: Delete Memory
When the “dEL”symbolandtheashing“ ”
symbol appear on the display, you can choose to
clear the memory. If you do not want to clear the
memory, press the “SET” button again to skip
this step.
If you want to clear ALL memory, press the “M”
button for (4) four seconds and both “dEL” and
“ ”willash.Pressthe“M” button again to
delete ALL memory. The “- - -” will appear to
indicate all memory has been deleted and the
meter will turn off. See Figure 28.
Setup is now complete. Press the “SET” button.
“OFF” is displayed and the meter turns off.
See Figure 29.
Figure 28
Figure 29
Figure 26
Figure 27
STEP 1: Insert the Test Strip
Insert a test strip with the contact bar end entering
intotheteststripslotrst.Pushtheteststripasfar
as it will go without bending it. The meter turns on
automatically. See Figure 30.
Voice Speaks: “Your Prodigy
®
meter is on.
Please wait. Please apply blood into the
test strip.”
STEP 2: Apply Blood Sample
When the meter shows the “ ”, apply blood to the
opening of the absorbent channel of the test strip
where it meets the narrow channel. Blood will be
drawn into the test strip. See Figure 31.
Iftheteststripconrmationwindowisfull(See Figure
32), you will hear a beep.
Voice Speaks: “Now testing.”
Iftheconrmationwindowisnotfull,“L-b” is displayed
and a new test strip will need to be used.
Ifyouhavetroublellingtheteststrip,pleasecontact
Customer Care at 1.800.243.2636 for assistance.
Performing a Blood Glucose Test
Figure 30
Figure 31
Figure 32
Comentários a estes Manuais