Prodigy Autocode Manual do Proprietário descarregar pdf (Página 18)

PRODIGY

Owner’s Manual PRODIGY

Owner’s Manual

Prodigy Diabetes Care, LLC www.prodigymeter.com

Prodigy Diabetes Care, LLC 1.800.243.2636

Caution: DO NOT:

• Smear or scrape the blood onto the test strip.

• Apply blood to the test strip when the test strip is not in

the meter.

• Put blood or foreign objects into the test strip slot.

STEP 3: Read Your Result

After the meter counts down from 6 to 1,

your blood glucose test result appears along

with the unit of measure, date and time.

See Figure 33.

Voice Speaks: “Blood glucose 108 mg/dL.”

This blood glucose result is automatically

stored in the meter memory. Turn the meter

off by removing the test strip. Discard the

used test strip carefully to avoid contamination.

Important: If you do not apply a blood

sample within (4) four minutes, the meter will

automatically turn off. You must remove the

test strip and re-insert it again to turn on the

meter and restart the test procedure.

Caution: If you cannot test due to a problem with your testing

supplies, contact Customer Care at 1.800.243.2636. Failure to test

could delay treatment and/or lead to serious medical conditions.

Figure 33

The Prodigy AutoCode

meter stores a maximum of the 450 most

recent blood glucose test results with date and time in its memory.

It also provides you with 7, 14 and 28–day averages of your blood

glucose test results. You can review the individual or average test

results by entering the memory mode.

STEP 1: Enter the Memory Mode

While the meter is turned off, press the “M” button

twice. The 7–day average will appear, indicating

that you are in the memory mode.

If you continue to press the “M” button, the 14 and

28–day averages will appear in order. You can then

review the last 450 individual test results

in memory.

Whenusingthemeterforthersttimeorwhen

the memory has been deleted, “- - -” appears,

indicating there are no test results in the meter

memory. See Figure 34.

STEP 2: Recalling Average Test Results

The 7–day average is calculated from the blood

glucose results obtained during the last 7 days.

It also indicates how many blood glucose tests

have been performed within this period, e.g., 21

(21 tests in the last 7 days). See Figure 35.

The 14–day average is calculated from the blood

glucose test results obtained during the last

14 days. See Figure 36.

Using the Meter Memory

Figure 34

Figure 35

Figure 36

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 44 45

Comentários a estes Manuais

Sem comentários

Prodigy Autocode Manual do Proprietário Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo Prodigy Autocode