
PRODIGY
Owner’s Manual PRODIGY
Owner’s Manual
Prodigy Diabetes Care, LLC www.prodigymeter.com
44
45
Prodigy Diabetes Care, LLC 1.800.243.2636
STEP 1: Insert the Test Strip
Insert a test strip with the contact bar end entering into
thetestslotrst.Pushtheteststripasfarasitwillgo
without bending it. The meter turns on automatically.
See Figure 51.
STEP 2: Apply Blood Sample
When the meter shows the “ ”, apply blood to the
opening of the absorbent channel of the test strip
where it meets the narrow channel. Blood will be drawn
into the test strip. See Figure 52.
Theteststripconrmationwindowshould
becompletelylledbeforethemeter
begins to count down. The meter will
beepwhentheconrmationwindowis
full. See Figure 53.
Ifyouhavetroublellingtheteststrip,
please contact Customer Care
at 1.800.243.2636 for assistance.
Performing a Blood Glucose Test
Figure 51
Figure 52
Figure 53
Caution:
DO NOT:
• Smear or scrape the blood onto the
test strip.
• Apply blood to the test strip when the test
strip is out of the meter.
• Put blood or foreign objects into the test
strip port.
STEP 3: Read Your Result
After the meter counts down from 6 to 1, your blood
glucose test result appears along with the unit of
measure, date and time. This blood glucose result
is automatically stored in the meter memory.
Turn the meter off by removing the test strip.
Discard the used test strip carefully to avoid
contamination. See Figure 54.
Important:Ifyoudonotapplyabloodsamplewithinve(5)
minutes, the meter will automatically turn off. You must remove the
test strip and re-insert it again to turn on the meter and restart the
test procedure.
Caution: If you cannot test due to a problem with your testing
supplies, contact Customer Care at 1.800.243.2636. Failure to test
could delay treatment and/or lead to serious medical conditions.
Figure 54
Comentários a estes Manuais